Welcome to Fractal Forums

Fractal Software => FractInt Gallery => Topic started by: Nahee_Enterprises on October 16, 2013, 09:53:16 PM




Title: Ear Ring Closeup
Post by: Nahee_Enterprises on October 16, 2013, 09:53:16 PM
An older image from FractInt.

    (http://www.Nahee.com/Fractals/FractInt/Images/Ear_Ring_Closeup.GIF)
 


Title: Re: Ear Ring Closeup
Post by: cKleinhuis on October 16, 2013, 10:17:42 PM
how nice, an image with a name! and its really well fitting!
the colors might be not my first choice, and the resolution is a bit low, but a nice motive!
well done :) do you still have the parameters ?! i see the rings moving!


Title: Re: Ear Ring Closeup
Post by: Nahee_Enterprises on October 26, 2013, 08:30:35 AM
   how nice, an image with a name!   and its really well fitting!
    the colors might be not my first choice, and the resolution is a bit low, but a nice motive!
    well done :)   do you still have the parameters ?!   i see the rings moving!

Thanks you.   But all of my images have names!!!   The problem is that you just do not think a name of "Untitled #34" is valid name.
If somebody can name an image "The Art of Picking Cherries" (http://www.fractalforums.com/gallery/the-art-of-picking-cherries), yet have nothing in the image which appears like a cherry, then what is the difference in "valid names" ???
At least mine are a lot more meaningful, even if they are just numbered.   :evil1:

Here is the .PAR file:
Code:

Ear_Ring_Closeup   { ;  (c) Paul N. Lee -- Nov 03, 2001 - 08:44:37
                     ; time=  0:00:26.04 on a PIII-700 at 640x480
                     ; Video=SF5 using FractInt 20.02.
  reset=2002 type=formula formulafile=_Test.par
  formulaname=MandelbrotMix4 function=ident passes=1
  center-mag=-2.03607159692995100/-0.01072338598387152/4498.015/-1/317.499\
  994109255397/8.18553266331012441e-006 params=1/2.03/-0.2/2.97/0/0
  float=y maxiter=5000 inside=0 proximity=0.4 outside=fmod
  periodicity=10 sound=off
  colors=000Kph<3>IhhHfiHdi<3>E_iEZjE_iI`gLaeGcYSdU<3>ekEilAlm1mm4ll6<6>hW\
  MhUOgSQ<3>eIZeF`dDb<2>c5ib3kc0lb1m<22>NGRMGQLHP<3>JJMJJLNJO<3>`HZcH`gGc<\
  3>tFnwFptGm<6>cHWaHTZHRWIO<3>MIEKJBHJ8FJ6CJ3AJ1<3>7H46H56G55G65G6<3>XKY_\
  NabKc_HdWEeCBf38g<13>T6LV6JX6I<3>d6Bg10<3>bLaaQjZPi<5>LKdJKcGJb<3>8GZ6GZ\
  3FY1EX<3>K`iPflTko<4>LYXJVTHSP<3>BH9AF6AHB<3>ANVAP_ARd<2>AVr<3>NLlRJjUGi\
  XEg_Cf<4>eBZfBXgAV<3>kAPlANnAMo9Kp9I`VGbUF<12>Q_LP_LO`M<3>KaOJaOIbPHbPGc\
  QFcQGbK<4>Dej5TwDeoMugLsh
  }


And the .FRM file is one of these two, not sure which one was originally used without trying them again:
Code:

MandelbrotMix4_v1  { ; Jim Muth
  c=pixel, a=real(p1), b=imag(p1), d=real(p2), f=imag(p2)
  g=1/f, h=1/d, j=1/(f-b), z=(-a*b*g*h)^j:
  z=(a*(z^b))+(d*(z^f))+c
  |z| <= 100
}

MandelbrotMix4     { ; Jim Muth
  a=real(p1), b=imag(p1), d=real(p2), f=imag(p2), g=1/f
  h=1/d, j=1/(f-b), z=(-a*b*g*h)^j, k=real(p3)+1
  l=imag(p3)+100, c=fn1(pixel):
  z=k*((a*(z^b))+(d*(z^f)))+c
  |z| < l
}