The All New FractalForums is now in Public Beta Testing! Visit FractalForums.org and check it out!
|
|
| Outside on the inside of the mandelbulb! | ||||||
| Previous Image | Next Image | ||||||
| Description: I just had to do a render of the inside now that Jesse managed to feature inside views of the mandelbulb in MB3D... http://www.fractalforums.com/index.php?action=gallery;sa=view;id=5864 I did this with a FoV of 360... Jesse: do I get a 360 degree view with this setting? I do not quite get it ![]() ANyway, here it is, with an outside view inside... Stats: Total Favorities: 0 View Who Favorited Filesize: 352.35kB Height: 1200 Width: 1200 Keywords: mandelbulb Posted by: KRAFTWERK February 28, 2011, 03:06:06 PMRating: ![]() ![]() ![]() ![]() by 1 members.Image Linking Codes
|
||||||
| 0 Members and 1 Guest are viewing this picture. |
|
Comments (4) ![]() |
|
| KRAFTWERK | March 01, 2011, 08:44:56 AM Thank you! ![]() OK Jesse, not sure if I get it, but I might start a thread about it if I need it someday... ...a relative heigh zoom value... I thought I should set it to a low zoom value... nevermind, a thread it is. ![]() |
| Jesse | February 28, 2011, 07:47:02 PM Cool! 360 degrees are only possible without the 'rectilinear lense' option, else it is limited to 170 or so degrees. And it is the y val, meaning the height should be 360 deg then, width maybe more, depending on the aspect. ...but because of the viewplane (it is not a pointlike camera) the full view angle would be only show up with a relative heigh zoom value! |
| lenord | February 28, 2011, 07:20:54 PM I've done a few 360s inside Internal Folding and Box caves but it seems to start repeating and not a 360 wrap around, almost like tiling. |
| Guest | February 28, 2011, 05:46:55 PM Very cool Johan. I didn't know you could use a FOV that wide. As usual you are pushing the limits... ![]() |
Powered by SMF Gallery Pro










